On the front of your ibi there is a single color white LED. The LED is either on, off or blinks with a certain rhythm to indicate a specific "System Condition". See below for details of the ibi LED behavior.
For more detailed information, please see reference the following articles:
- ibi LED is Blinking Slow and device is offline
- ibi LED is Blinking Fast and device is offline
- ibi LED is Solid White and device is offline
|
LED Behavior |
System Condition |
Comments |
| No LED light illuminated | Power if Off or Disconnected | No power to the device |
| Solid Light - no blinking | Ready to Setup | Online and ready to be setup |
| Solid Light - no blinking | Ready and Online | Online and accessible |
| Solid Light - no blinking | Firmware Update | Followed by a reboot and return to "Solid White LED" state |
| Slow "breathing" rhythm | Shutdown through app | ibi has been Shut down and will return to a "No LED Light illuminated" state |
| Slow "breathing" rhythm | Auxiliary Setup mode started | Auxiliary setup mode has been triggered by pressing the pin reset button and should return to a “Solid White LED” state after 3 minutes if no action is take or the setup process was successful |
| Slow "breathing" rhythm | Demoted device owner state | Device Owner has been demoted to a guest user. ibi must be setup again using a different email address than the previous device owner before it can return to a “Solid White LED” state |
| Slow "breathing" rhythm | Unsupported Wi-Fi Network | ibi is connected to an unsupported Wi-Fi network |
| Fast "breathing" rhythm | Demote device owner started | Demote device owner has been started using the pin reset, web or mobile app and will transition to a “Slow Breathing LED” state once completed. ibi must be setup again using a different email address than the previous device owner |
| Fast "breathing" rhythm | Wi-Fi Connection Not Available | ibi successfully connected to Wi-Fi but the connection has been lost |
| Fast "breathing" rhythm | Wi-Fi Connection Available - No Cloud Connection | ibi successfully connected to Wi-Fi, Internet connection is good for other computers and devices on the network |
| Fast "breathing" rhythm | Wi-Fi Password Incorrect | Password used for Wi-Fi connection has changed or is incorrect |
| Fast "breathing" rhythm | Fault State | ibi is in a fault state and requires attention |
| Fast "breathing" rhythm | System Erase | System Erase has been started. ibi will transition to a “Solid White LED” state at the completion of the process. ibi must be setup again. |
| Hard On/Off Blink | Device Not Booting | LED will hard blink on and off (4 seconds between blinks) if the device fails to boot up |