Your ibi LED should go through the following states instead of being 100% illuminated when it is powered on or rebooted:
- LED STATE #1: Full illumination at power on.
- LED STATE #2: DIM slightly for a few seconds.
- LED STATE #3: "Slow breathing rhythm" while coming to a "system ready" state.
- LED STATE #4: "Fast breathing rhythm" while coming to a "system ready" state.
- LED STATE #5: Full illumination "Solid White" when "system ready" state is reached.
If your ibi's LED becomes solid immediately after applying power, it may not have completed the boot up sequence properly. Powering OFF and ON your ibi multiple times may cause the device to recover from the Solid White LED at power on state.
If your ibi stays in a constant "Hard On/Off Blinking State (about 4 seconds between each blink)" your ibi is not booting up and should be returned to the place of purchase or replaced under warranty.
- Power off and on ibi by removing the power plug, wait a few minutes and insert the power plug again.
- To replace your ibi, return it to the place of purchase or submit an Online Return Material Authorization(RMA) Request
- For data recovery, please refer to ibi Data Recovery Partners